Aspire In-Wall Dual 8" Subwoofer
The Aspire® IWS82 is a passive in-wall subwoofer designed
to produce deep, gratifying bass in any room without taking
up valuable floor space.
Aspire In-Wall Dual 8" Subwoofer
The Aspire® IWS82 is a passive in-wall subwoofer designed to produce deep, gratifying bass
in any room without taking up valuable floor space. For demanding multi-room audio and home
theater applications, the full low end delivered by the Aspire IWS82 adds impact to any in-wall
or in-ceiling speaker system. High-end composition and paintable zero-bezel grilles provide a
perfect complement to other Crestron® Aspire and Essence® speakers, offering easy install-
ation and a discreet appearance anywhere extended low-frequency response is desired.
To achieve maximum performance in a minimal space, Crestron has employed dual high-
performance 8 inch woofers featuring eight-layer voice coils and woven poly-glass composite
cones. The use of two 8 inch woofers affords tighter sounding bass than one comparable 12 inch
woofer, with the added benefit of fitting in a standard 2x4 framed wall with 5/8 inch gypsum board.
[1] Total power handling for the Aspire IWS82 is 200 Watts (program) at 8 Ohms, with a tailored
frequency response of 40 Hz to 120 Hz (±3 dB) and a usable range from 25 Hz to 150 Hz.
| Features & Performance | — | ||
|---|---|---|---|
| Woofer: | (2) 8 inch (203 mm) Woven Poly-Glass Composite w/ Rubber Surround 8-Layer Voice Coils Steel Baskets | ||
| Low-Pass Filter: | 120 Hz 2nd order | ||
| Impedance: | 8 Ohms Nominal | ||
| Frequency Response: | 40 Hz to 120 Hz (±3 dB) | ||
| Frequency Range: | 25 to 150 Hz (-10 dB) | ||
| Power Handling: | 200 Watts Program | ||
| Sensitivity: | 89 dB @ 1W/1m | ||
| Connections | — | ||
| Input: | (2) Spring Terminals Maximum Wire Size: 10 AWG | ||
| Environmental | — | ||
| Temperature: | 41° to 104° F (5° to 40° C) | ||
| Humidity: | 10% to 90% RH (Non-Condensing) Indoor Use Only | ||
| Construction | — | ||
| Baffle: | ABS Plastic Black | ||
| Grille: | Steel w/ White Textured Finish Paintable Magnetically-Held "Zero-Bezel" Frameless Design | ||
| Mounting: | Flush wall mount using 8 integral spring-loaded toggle clamps 1.35 in (34 mm) maximum surface thickness 4.13 in (105 mm) minimum mounting depth 19.2 in (488 mm) high x 9.8 in (249 mm) wide recommended cutout | ||
| Dimensions | — | ||
| Height: | 19.87 in (505 mm) | ||
| Width: | 10.45 in (266 mm) | ||
| Depth: | 4.30 in (110 mm) | ||
| Weight: | 10.5 lb (4.8 kg) |
| Manuals / Guides / Diagrams | — | File Size |
|---|---|---|
| Spec Sheet | ASPIRE_IWS82_SS | View Mode |
| Quickstart Guide | ASPIRE_IWS82_QSG | 1.52 M |
| Zoomable Drawing | ASPIRE_IWS82_ZD | View Mode |
| CAD | ASPIRE_IWS82_CAD_PDF | 1.72 M |