Artnet Node 2 / 4 / 8
High-output, User-friendly, Powerful
2/4/8 PORT NODE is a highly capable DMX router and much more!
As a DMX router, it translates Artnet protocol into DMX in/out universes
but can also be used as a DMX merger, DMX splitter hub, fail safe device,
cueplayback, and DMX viewer monitor.
Artnet to DMX – DMX to Artnet conversion
10 Factory and users Presets
99 Cues with Fade Time
Hold Time and Cue Linking
| Physical | — |
|---|---|
| Length: | 288 mm |
| Width: | 482.2 mm |
| Height: | 43.6 mm (1U) |
| Weight: | 3.2 kg |
| Control & User Interface | — |
| Front Panel Display: | 4-Button Control Menu 1 x Dual-Color LED per port Mouse & Keyboard Input Remote Web Access DMX Viewer for any Physical Incoming or Outgoing DMX Port |
| Hardware | — |
| Processor: | 520 MHz Processor (Fast, Synchronized DMX Output) |
| Latency: | Virtually Zero Ethernet: Artnet-compliant |
| Artnet: | Artnet II-compliant ACN-ready Built-in webpage for quick access & remote setup 10/100 Mbit connection Dual-color LED for each port 8 open-contact inputs: Inputs transmit ArtNet-compatible contact closures on the network Contact closures can trigger factory & user presets and start cue playback 8 ports: Configurable as input or output Opto-isolated circuit for each port User-definable DMX timings for each port Each port set as output can be set to constantly repeat the last received DMX frame, or only to output new frames RDM-ready |
| Software | — |
| User Presets: | 10 User Presets for Device Configuration (Maxxyz) |
| Maxedia: | Maxedia use preset with auto-IP address setting Presets for DMX Hub and Spitter functionality Mergeable setup where multiple inputs are routed in LTP, HTP to one output Ports assignable to input or output Ports routable to/from internal ports or to/from any DMX universe on Artnet DMX and Artnet test pattern generator Artnet broadcast and unicast compatible Configuration files loadable/storable on USB memory sticks Firmware upload via USB memory stick Port routing triggerable by contact closure through the use of user presets Ports’ DMX channel ranges configurable Merger modules routable between inputs & outputs and/or Artnet universes Channel ranges can be put in LTP/HTP, copy or fixed value from other channels Auto or manual IP addressing Tracking backup function: automatic handover to another Artnet signal if one Artnet signal fails. |
| Construction | — |
| Construction Housing: | Steel & Aluminum |
| Finish: | Electrostatic Powder-Coated |
| Installation | — |
| Installation: | 19-Inch Rackmount (1U) |
| Connections | — |
| 10/100 base-T ethernet port: | Neutrik locking RJ45 |
| Ethercon socket DMX in/out ports: | 8 x 5-pin female |
| XLR Keyboard: | USB or PS2 Mouse: USB or PS2 |
| Backup, Software Upload: | USB Monitor: VGA 15-pin |
| AC Power Input: | 3-pin IEC Male Socket AC Power Throughput: 3-pin IEC Female Socket |
| Electrical | — |
| AC Power: | Auto-ranging 100 – 240 VAC nominal 50/60 Hz Main Fuse: 2 x 500 mA T (Slow-Blow) |
| Typical Power & Current | — |
| 10/100 base-T ethernet port: | 100 V, 60 Hz: 220 mA Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
| Physical | — |
|---|---|
| Length: | 288 mm |
| Width: | 482.2 mm |
| Height: | 43.6 mm (1U) |
| Weight: | 3.2 kg |
| Control & User Interface | — |
| Front Panel Display: | 4-Button Control Menu 1 x Dual-Color LED per port Mouse & Keyboard Input Remote Web Access DMX Viewer for any Physical Incoming or Outgoing DMX Port |
| Hardware | — |
| Processor: | 520 MHz Processor (Fast, Synchronized DMX Output) |
| Latency: | Virtually Zero Ethernet: Artnet-compliant |
| Artnet: | Artnet II-compliant ACN-ready Built-in webpage for quick access & remote setup 10/100 Mbit connection Dual-color LED for each port 8 open-contact inputs: Inputs transmit ArtNet-compatible contact closures on the network Contact closures can trigger factory & user presets and start cue playback 8 ports: Configurable as input or output Opto-isolated circuit for each port User-definable DMX timings for each port Each port set as output can be set to constantly repeat the last received DMX frame, or only to output new frames RDM-ready |
| Software | — |
| User Presets: | 10 User Presets for Device Configuration (Maxxyz) |
| Maxedia: | Maxedia use preset with auto-IP address setting Presets for DMX Hub and Spitter functionality Mergeable setup where multiple inputs are routed in LTP, HTP to one output Ports assignable to input or output Ports routable to/from internal ports or to/from any DMX universe on Artnet DMX and Artnet test pattern generator Artnet broadcast and unicast compatible Configuration files loadable/storable on USB memory sticks Firmware upload via USB memory stick Port routing triggerable by contact closure through the use of user presets Ports’ DMX channel ranges configurable Merger modules routable between inputs & outputs and/or Artnet universes Channel ranges can be put in LTP/HTP, copy or fixed value from other channels Auto or manual IP addressing Tracking backup function: automatic handover to another Artnet signal if one Artnet signal fails. |
| Construction | — |
| Construction Housing: | Steel & Aluminum |
| Finish: | Electrostatic Powder-Coated |
| Installation | — |
| Installation: | 19-Inch Rackmount (1U) |
| Connections | — |
| 10/100 base-T ethernet port: | Neutrik locking RJ45 |
| Ethercon socket DMX in/out ports: | 8 x 5-pin female |
| XLR Keyboard: | USB or PS2 Mouse: USB or PS2 |
| Backup, Software Upload: | USB Monitor: VGA 15-pin |
| AC Power Input: | 3-pin IEC Male Socket AC Power Throughput: 3-pin IEC Female Socket |
| Electrical | — |
| AC Power: | Auto-ranging 100 – 240 VAC nominal 50/60 Hz Main Fuse: 2 x 500 mA T (Slow-Blow) |
| Typical Power & Current | — |
| 10/100 base-T ethernet port: | 100 V, 60 Hz: 220 mA Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
| Physical | — |
|---|---|
| Length: | 288 mm |
| Width: | 482.2 mm |
| Height: | 43.6 mm (1U) |
| Weight: | 3.2 kg |
| Control & User Interface | — |
| Front Panel Display: | 4-Button Control Menu 1 x Dual-Color LED per port Mouse & Keyboard Input Remote Web Access DMX Viewer for any Physical Incoming or Outgoing DMX Port |
| Hardware | — |
| Processor: | 520 MHz Processor (Fast, Synchronized DMX Output) |
| Latency: | Virtually Zero Ethernet: Artnet-compliant |
| Artnet: | Artnet II-compliant ACN-ready Built-in webpage for quick access & remote setup 10/100 Mbit connection Dual-color LED for each port 8 open-contact inputs: Inputs transmit ArtNet-compatible contact closures on the network Contact closures can trigger factory & user presets and start cue playback 8 ports: Configurable as input or output Opto-isolated circuit for each port User-definable DMX timings for each port Each port set as output can be set to constantly repeat the last received DMX frame, or only to output new frames RDM-ready |
| Software | — |
| User Presets: | 10 User Presets for Device Configuration (Maxxyz) |
| Maxedia: | Maxedia use preset with auto-IP address setting Presets for DMX Hub and Spitter functionality Mergeable setup where multiple inputs are routed in LTP, HTP to one output Ports assignable to input or output Ports routable to/from internal ports or to/from any DMX universe on Artnet DMX and Artnet test pattern generator Artnet broadcast and unicast compatible Configuration files loadable/storable on USB memory sticks Firmware upload via USB memory stick Port routing triggerable by contact closure through the use of user presets Ports’ DMX channel ranges configurable Merger modules routable between inputs & outputs and/or Artnet universes Channel ranges can be put in LTP/HTP, copy or fixed value from other channels Auto or manual IP addressing Tracking backup function: automatic handover to another Artnet signal if one Artnet signal fails. |
| Construction | — |
| Construction Housing: | Steel & Aluminum |
| Finish: | Electrostatic Powder-Coated |
| Installation | — |
| Installation: | 19-Inch Rackmount (1U) |
| Connections | — |
| 10/100 base-T ethernet port: | Neutrik locking RJ45 |
| Ethercon socket DMX in/out ports: | 8 x 5-pin female |
| XLR Keyboard: | USB or PS2 Mouse: USB or PS2 |
| Backup, Software Upload: | USB Monitor: VGA 15-pin |
| AC Power Input: | 3-pin IEC Male Socket AC Power Throughput: 3-pin IEC Female Socket |
| Electrical | — |
| AC Power: | Auto-ranging 100 – 240 VAC nominal 50/60 Hz Main Fuse: 2 x 500 mA T (Slow-Blow) |
| Typical Power & Current | — |
| 10/100 base-T ethernet port: | 100 V, 60 Hz: 220 mA Measurements made at nominal voltage. Allow for a deviation of +/- 10%. |
| ARTNET Node 2 | — | File Size | |||
|---|---|---|---|---|---|
| Spec Sheet | ARTNET2_SS | 0 KB | |||
| Quickstart Guide | ARTNET2_QSG | 0 KB | |||
| Zoomable Drawing | ARTNET2_ZD | 0 KB | |||
| CAD | ARTNET2_CAD | 0 KB | |||
| Revit | ARTNET2_REVIT | 0 KB | |||
| ARTNET Node 4 | — | File Size | |||
| Spec Sheet | ARTNET4_SS | 0 KB | |||
| Quickstart Guide | ARTNET4_QSG | 0 KB | |||
| Zoomable Drawing | ARTNET4_ZD | 0 KB | |||
| CAD | ARTNET4_CAD | 0 KB | |||
| Revit | ARTNET4_REVIT | 0 KB | |||
| ARTNET Node 8 | — | File Size | |||
| Spec Sheet | ARTNET8_SS | 0 KB | |||
| Quickstart Guide | ARTNET8_QSG | 0 KB | |||
| Zoomable Drawing | ARTNET8_ZD | 0 KB | |||
| CAD | ARTNET8_CAD | 0 KB | |||
| Revit | ARTNET8_REVIT | 0 KB |