Aspire® 8" 2-Way Single-Point Stereo In-Ceiling Speaker

The Aspire line strikes a perfect balance between performance and price, delivering pristine,
impactful sound quality, with minimal impact on your décor thanks to paintable zero-bezel
grilles. Round shaped grilles are included, while square grilles are available as an option sep-
arately. Streamlined installation of each speaker is facilitated through a three-point, spring-
loaded toggle clamp mounting system optimized to minimize interference with obstructions
within the ceiling space.

The Aspire IC8DT model is a single in-ceiling speaker featuring an 8 inch dual voice coil woofer
and dual 1 inch dome tweeters. It is designed to produce stereo sound in the space of a single
speaker, perfect for bathrooms and other small spaces. Its high-end, woven poly-glass composite
woofer and advanced synthetic polymer tweeters afford rich, impactful low end and crisp, soaring
highs. A precisely tuned stereo 4th order crossover ensures a full, warm and detailed response
across the spectrum. Power handling is an impressive 100 Watts (program) per channel, with a
wide frequency response from 48 Hz to 20 kHz (±3 dB).

Features & Performance
Woofer: Dual voice coil 8 inch (203 mm) Woven poly-glass composite w/ rubber surround
Vented pole piece & steel basket
Tweeter: (2) 0.98 inch (25 mm) Advanced synthetic polymer dome
Ferrofluid cooling
Crossover: 4th order
Crossover Frequency: 2.5 kHz
Impedance: 8 Ohms nominal per channel
Frequency Response: 48 Hz to 20 kHz (±3 dB)
Frequency Range: 40 Hz to 20 kHz (-10 dB)
Power Handling: 100 Watts Program per channel
Sensitivity: 89.5 dB @ 1W/1m per channel
Input: (2 sets of 2) Spring terminals
Maximum Wire Size: 10 AWG
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (Non-Condensing)
Indoor Use Only
Baffle: ABS Plastic
Grille: Steel with white textured finish
Magnetically-held "zero-bezel" frameless design
(Round grille included)
(Square grille sold separately)
Mounting: Flush Ceiling mount using 3 integral spring-loaded toggle clamps
1.35 in (34 mm) Maximum surface thickness
4.47 in (114 mm) Minimum mounting depth
10.8 in (275 mm) Diameter recommended cutout
Diameter: 11.64 in (296 mm)
Depth: 4.66 in (119 mm)
Weight: 7.55 lb (3.43 kg)
Manuals / Guides / Diagrams File Size
Spec Sheet ASPIRE_IC8DT_QSG View Mode
Quickstart Guide ASPIRE_IC8DT_QSG 5.34 M
Zoomable Drawing ASPIRE_IC8DT_ZD View Mode
ASPIRE_IC8DT_front_duo ASPIRE_IC8DT_front_duo

Have a question? Contact us!

Contact Us