Essence 5.25" 2-Way In-Wall Speakers

The Essence line promises the ultimate in installed audio design, delivering simply stunning
sound quality while minimizing any impact on your décor thanks to paintable zero-bezel
grilles. Both round and square grilles are included. Streamlined installation of each speaker
is facilitated through a three-point, spring-loaded toggle clamp mounting system optimized
to minimize interference with obstructions within the ceiling space.

The Essence IC5 model provides a pair of 2-way in-ceiling speakers featuring 5-1/4 inch long-
throw woven Kevlar® woofers for deep, defined low end, and large 1.1 inch advanced synthetic
polymer dome tweeters for crisp, fluent highs, articulate midrange, and consistent coverage across
a wider listening area. Cast aluminum woofer baskets assure pure, uncolored bass response. Offset
post-mounting of the tweeters reduces midrange frequency response anomalies normally caused by
interference between the woofer and the back of the tweeter. Precision 4th order crossovers utilizing
the highest quality components ensure a full, rich and detailed response across the spectrum. Power
handling is an impressive 125 Watts (program), with a wide frequency response from 55 Hz to 20 kHz
(±3 dB).



 
Features & Performance
Woofer: 5.25 inch (134 mm) Woven Kevlar® w/ Rubber surround
Vented pole piece & Cast aluminum basket
Tweeter: 1.1 inch (28 mm) Advanced synthetic polymer dome
Ferrofluid cooling
Offset Post-mounted
Crossover: 4th order Linkwitz-Riley
Crossover Frequency: 2 kHz
Impedance: 8 Ohms Nominal
Frequency Response: 55 Hz to 20 kHz (±3 dB)
Frequency Range: 45 Hz to 20 kHz (-10 dB)
Power Handling: 125 Watts program
Sensitivity: 88.5 dB @ 1W/1m
Connections
Input: (2) Spring Terminals
Maximum Wire Size: 10 AWG
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (Non-Condensing)
Indoor Use Only
Construction
Baffle: ABS Plastic
Black
Grille: Steel w/ White Textured Finish
Paintable
Magnetically-Held "Zero-Bezel" Frameless Design
Mounting: Flush ceiling mount using 3 integral spring-loaded toggle clamps
1.35 in (34 mm) Maximum surface thickness
3.88 in (99 mm) Minimum mounting depth
7.4 in (188 mm) Diameter recommended cutout
Dimensions
Diameter: 8.30 in (211 mm)
Depth: 4.07 in (104 mm)
Weight: 4.58 lb (2.08 kg) Per Speaker
Manuals / Guides / Diagrams File Size
Spec Sheet ESSENCE_IC5_QSG View Mode
Quickstart Guide ESSENCE_IC5_QSG 840 K
Zoomable Drawing ESSENCE_IC5_ZD View Mode
CAD ESSENCE_IC5_CAD 718 K
Revit ESSENCE_IC5_REVIT 324 K
ESSENCE_IC5_FRONT_DUO ESSENCE_IC5_FRONT_DUO_2
 


Have a question? Contact us!



[contact-form-7 id="4" title="Contact 1"]