Essence 6.5" 2-Way In-Wall Speakers
The Essence line promises the ultimate in installed audio design,
delivering simply stunning sound quality while minimizing any
impact on your décor thanks to paintable zero-bezel grilles.
Essence 6.5" 2-Way In-Wall Speakers
The Essence line promises the ultimate in installed audio design, delivering simply stunning sound
quality while minimizing any impact on your décor thanks to paintable zero-bezel grilles. Stream-
lined installation of each speaker is facilitated through a spring-loaded toggle clamp mounting system.
The Essence IW6 model provides a pair of 2-way in-wall speakers featuring 6-1/2 inch long-throw woven
Kevlar® woofers for deep, defined low end, and large 1.1 inch advanced synthetic polymer dome tweeters
for crisp, fluent highs, articulate midrange, and consistent coverage across a wider listening area. Cast alu-
minum woofer baskets assure pure, uncolored bass response. Precision 4th order crossovers utilizing the
highest quality components ensure a full, rich and detailed response across the spectrum. Power handling
is an impressive 150 Watts program with a wide frequency response from 45 Hz to 20 kHz (±3 dB).
Features & Performance | — | ||
---|---|---|---|
Woofer: | 6.5 inch (165 mm) Woven Kevlar® w/ Rubber Surround Vented Pole Piece & Cast Aluminum Basket | ||
Tweeter: | 1.1 inch (28 mm) Advanced Synthetic Polymer Dome Ferrofluid Cooling Damped Aperiodic Rear Chamber | ||
Crossover: | 4th order Linkwitz-Riley | ||
Crossover Frequency: | 2 kHz | ||
Impedance: | 8 Ohms Nominal | ||
Frequency Response: | 45 Hz to 20 kHz (±3 dB) | ||
Frequency Range: | 35 Hz to 20 kHz (-10 dB) | ||
Power Handling: | 150 Watts program | ||
Sensitivity: | 89 dB @ 1W/1m | ||
Connections | — | ||
Input: | (2) Spring Terminals Maximum Wire Size: 10 AWG | ||
Environmental | — | ||
Temperature: | 41° to 104°F (5° to 40°C) | ||
Humidity: | 10% to 90% RH (Non-Condensing) Indoor Use Only | ||
Construction | — | ||
Baffle: | ABS Plastic Black | ||
Grille: | Steel w/ White Textured Finish Paintable Magnetically-Held "Zero-Bezel" Frameless Design | ||
Mounting: | Flush Wall Mount Using 6 Integral Spring-Loaded Toggle Clamps 1.35 in (34 mm) Maximum Surface Thickness 3.49 in (89 mm) Minimum Mounting Depth 11.2 in (285 mm) High x 8.3 in (211 mm) Wide Recommended Cutout | ||
Dimensions | — | ||
Height: | 11.86 in (301 mm) | ||
Width: | 8.98 in (228 mm) | ||
Depth: | 3.67 in (94 mm) | ||
Weight: | 5.74 lb (2.61 kg) Per Speaker |
Manuals / Guides / Diagrams | — | File Size |
---|---|---|
Spec Sheet | ESSENCE_IW6_SS | View Mode |
Quickstart Guide | ESSENCE_IW6_QSG | 1.9 M |
Zoomable Drawing | ESSENCE_IW6_ZD | View Mode |
CAD | ESSENCE_IW6_CAD_PDF | 1.08 M |
Revit | ESSENCE_IW6_REVIT | 404 K |
Have a question? Contact us!
[contact-form-7 id="4" title="Contact 1"]