AIR Dual 8" In-Ground Subwoofer

The AIR IGS82T is a passive in-ground subwoofer, employing dual 8” woofers for tight,
controlled bass. Power handling is 200 Watts (program) at 8 Ohms, with a frequency
response of 38 Hz to 150 Hz (±3 dB) and usable low-end range down to 25 Hz. Its built-
in 150 Hz low-pass filter allows the AIR IGS82T to be driven by a full range power amplifier
without requiring a separate external crossover.

Using its internal transformer, the AIR IGS82T may be operated at 70 or 100 Volts, allowing
multiple subwoofers to be connected in parallel and driven by a single high-powered 70 or 100
Volt power amplifier. Running at 70 or 100 Volts allows for longer wire runs using lower gauge
wire than is required by an 8 Ohm speaker.

The AIR IGS82T includes a short length of direct-burial wire that is permanently attached to the
speaker enclosure. A suitable in-ground electrical box (not included) is advised for termination of
the speaker and transformer wiring. A set of five waterproof wire nuts is included.



 
Features & Performance
Woofer: (2) 8 inch (203 mm) Polypropylene w/ Rubber Surround & Steel Basket
Low-Pass Filter: 150 Hz
Impedance: 8 Ohms Nominal w/ Transformer Bypassed
Transformer Taps: 75W or 150W @ 70V
150W @ 100V
Frequency Response: 38 Hz to 150 Hz (±3 dB)
Frequency Range: 25 to 180 Hz (-10 dB)
Power Handling: 200 Watts program
Sensitivity: 80 dB @ 1W/1m
Connections
Input: (1) 3 feet (1 m) Attached Direct Burial Cable Containing (5) 16 AWG (1.31 mm2) Conductors
Unterminated, As Follows:
Black: Common
Red: 8 Ohm Speaker Input
Purple: 75W@70V or 150W@100V Transformer Input
Orange: 150W@70V Transformer Input
Yellow: Transformer Output (Ties To Red Wire To Enable 70/100V Operation)
Includes Five Waterproof Wire Nuts
Requires A Suitable Electrical Junction Box (Not Included)
Environmental
Temperature: -2° to 120°F (-19° to 49°C)
Humidity: 5% to 100% RH (Non-Condensing)
Splash Resistance: IPx4 Rated Per IEC 60529
Construction
Enclosure: Glass Fiber Reinforced ABS Plastic
Black
Port Tube: Metal
Black
(w/ Metal Mesh Grille)
Port Cap: Glass Fiber Reinforced ABS Plastic
Bronze Textured Finish
In-Ground Installation: Designed For Direct-Burial In Soil w/ Good Drainage
(Avoid Placement Near In-Ground Sprinklers To Prevent The Direct Spray Of Water From Entering The Port Tube)
Dimensions
Height: 24.50 in (622 mm)
10.72 in (273 mm) Without Port Tube & Cap
Width: 14.50 in (368 mm)
Depth: 25.50 in (647 mm)
Weight: 38.5 lb (17.35 kg)
Manuals / Guides / Diagrams File Size
Spec Sheet AIR_IGS82T_SS 1.43 M
DO Guide AIR_IGS82T_QSG 507 K
ASPIRE_IWS82_FRONT_DUO ASPIRE_IWS82_FRONT_DUO_2
 


Have a question? Contact us!



[contact-form-7 id="4" title="Contact 1"]