Perfectly Built with High Grade Wisa Birch Plywood

Real 500W RMS power capacity (8 hours pink noise)

Natural sound and incredible holographic reproduction optimized for smooth
frequency response in and out axis. Premium Neodymium custom made Eur-
opean Drivers (HF & LF) proprietary 80ºx50º rotatable 6th order Polynomial
horn heavy braced birch plywood cabinet (15 & 18mm) touring grade soft
touch black painting. Dual same monitor angle, for easy stage monitor coupling
(no L or R versions needed). Recessed backpanel.

VT12 loudspeaker system is suitable for near field main PA reinforcement with
or without subwoofer, portable system or permanent installation, monitor on
stages, and delay fill

Suitable in spaces like:
FoH, Multi-functional room, Auditorium and Theater,
Nightclub, Pub, Bar, Commercial announcements

Made for Rental

Power Capacity (50~15000Hz Pink Noise 8 Hours) 500W RMS
1000W Program
Nominal impedance 8 Ohm
Frequency Response (-6dB half space / No EQ) 55~18000Hz
Manufacturing Consistency Tolerance ±2dB From 300 To 10000Hz
Average Sensitivity 98dB/W/m (wideband 200~16000Hz)
Calculated Maximum (SPL / 1m) 125dB continuous
128dB Program
Nominal Directivity (-6dB) 80° x 50° above 1000Hz
Recommended Low Cut Filter 40Hz 24dB/oct in full range mode
60-120Hz w/ Subwoofer
Low Frequency driver Custom Made 12″ CELTO Driver
Ferrite Magnet
3" In / Out Voice Coil
High Frequency Driver Custom made 1.4” exit CELTO driver
Neodymium magnet
2.8” Ferrofluid Voice Coil
Aquaplased TC4 Diaphragm
Crossover Passive mode only – 1500Hz
12dB/oct On LF
18dB/oct On HF
Flying hardware 11 M8 Points
Connectors 2x NEUTRIK Speakon® NL4MP
(1+/1- Link, 2+/2- Input & Link)
Floor Monitor use Yes
2 Angles
Pole mount 35mm Dual Pot
(0 & 10 Degrees Angles)
Cabinet CNC Made w/ Tongue & Grove Assembly
15mm/18mm Finnish WISA Birch Plywood
Finish Touring Grade Textured Black Rubberized Coating
Size (WxHxD) 356 x 620 x 370 mm
Weight 21kg net, 26kg gross
Manuals / Guides / Diagrams File Size
Data Sheet VT12_DS 588 KB
VT12_front_angle_hires VT12_nogrill_front_angle_hires VT12_side_hires VT12_CAD_WEB

Have a question? Contact us!

Contact Us