Perfectly Built with High Grade Wisa Birch Plywood

Real 900W RMS power capacity (8 hours pink noise)

Natural sound and incredible holographic reproduction optimized for smooth
frequency response in and out axis. Premium Neodymium custom made Eur-
opean Drivers (HF & LF). Proprietary 80ºx50º rotatable 6th order Polynomial
horn. Heavy braced birch plywood cabinet (18mm). Touring grade soft touch
black painting. Dual same monitor angle, for easy stage monitor coupling (no
L or R versions needed). Recessed back panel.

VT15 loudspeaker system is suitable for near field main PA reinforcement with
or without subwoofer, portable system or permanent installation, monitor on
stages, and delay fill.

Suitable in spaces like:
FoH, Multi-functional room, Auditorium and Theater,
Nightclub, Pub, Bar, Commercial announcements

Made for Rental

Power Capacity (50~15000Hz Pink Noise 8 Hours) 900W RMS
1800W Program
Nominal Impedance 8 Ohm
Frequency Response (-6dB Half Space / No EQ) 45~18000Hz
Manufacturing Consistency Tolerance ±2dB from 300 To 10000Hz
Average Sensitivity 99dB/W/m
(wideband 200~16000Hz)
Calculated Maximum (SPL / 1m) 129dB Continuous
132dB Program
Nominal Directivity (-6dB) 80° x 50° Above 1000Hz
Recommended Low Cut Filter 35Hz 24dB/oct In Full Range Mode
60-120Hz w/ Subwoofer
Low Frequency Driver Custom Made 15″ CELTO Driver
Neodymium Magnet
4” In/Out Voice Coil
High Frequency Driver Custom Made 1.4” Exit CELTO driver
Neodymium Magnet
2.8” Ferrofluid Voice Coil
Aquaplased TC4 Diaphragm
Crossover Passive mode only – 1400Hz
12dB/oct On LF
18dB/oct On HF
Flying Hardware 14 M8 Points
Connectors 2x NEUTRIK Speakon® NL4MP
(1+/1- Link, 2+/2- Input & Link
Floor Monitor Use Yes
2 Angles
Pole Mount 35mm Dual Pot
(0 & 10 Degrees Angles)
Cabinet CNC Made w/ Tongue & Grove Assembly
18mm Finnish WISA Birch Plywood
Finish Touring Grade Textured Black Rubberized Coating
Size (WxHxD) 445 x 735 x 425 mm
Weight 29kg Net, 35kg Gross
Manuals / Guides / Diagrams File Size
Data Sheet VT15_DS 571 KB
VT15_nogrill_front_angle_hires VT15_front_angle_hires VT15_back_hires2 VT15_side_hires VT15_CAD_WEB

Have a question? Contact us!

Contact Us