High SPL in a Compact 3-Way Design
Natural sound and incredible holographic reproduction
optimized for smooth frequency response in and out axis.
VT153HD
High SPL in a Compact 3-Way Design
Real 900W + 300W RMS power capacity (8 hours pink noise)
Natural sound and incredible holographic reproduction optimized for smooth
frequency response in and out axis. Premium Neodymium custom made Eur-
opean Drivers (LF / MF / HF). Proprietary 70ºx40º Rotatable horn. Heavy
braced birch plywood cabinet (25 and 18mm). Touring grade soft touch black
painting.
VT153HD loudspeaker system is suitable for near field main PA reinforcement
with or without subwoofer, portable system or permanent installation and delay
fill.
Suitable in spaces like:
FoH, Multi-functional room, Auditorium and Theater,
House of Worship, Night club, Pub, Bar, Commercial announcements
Install (Rotatable Horn)
Made for Rental
| Specifications | — |
|---|---|
| Power Capacity (50~15000Hz Pink Noise 8 Hours) | 900W RMS LF + 300W RMS MHF 1800W + 600W Program |
| Nominal Impedance | 8 Ohm LF + 8 Ohm MHF |
| Frequency Response (-6dB Half Space) | 45~19000Hz w/ Recommended Preset |
| Manufacturing Consistency Tolerance | ±2dB from 300 to 10000Hz |
| Average Sensitivity | 99dB/W/m LF + 108dB/W/m MHF |
| Calculated Maximum (SPL / 1m) | 132dB Continuous 135dB Program |
| Nominal Directivity (-6dB) | 70° x 40° above 600Hz |
| Recommended Low Cut Filter | 30Hz 24dB/oct In Full Range Mode 60-100Hz w/ Subwoofer |
| Low Frequency driver | Custom Made 15″ CELTO Driver Neodymium magnet 4” Voice Coil |
| Mid Frequency Driver | Custom Made 6,5″ CELTO Driver Neodymium Magnet 2” Voice Coil Horn Loaded w/ Phase Plug |
| High Frequency Driver | Custom Made 1.4” Exit CELTO Driver Neodymium Magnet 2.8” Voice Coil Aquaplased TC4 Diaphragm |
| Crossover | Bi-amp Mode Only (DSP Mandatory) 580Hz Active, 24dB/oct Between LF & MHF 2.4kHz Passive 24dB/oct Between MF & HF |
| Flying Hardware | 13 M8 Points |
| Connectors | 2x NEUTRIK Speakon® NL4MP (1+/1- LF , 2+/2- MHF) |
| Floor Monitor use | No |
| Pole Mount | 35mm Dual Pot (0 & 10 Degrees Angles) |
| Cabinet | CNC Made w/ Tongue & Grove Assembly 18mm/25mm Birch Plywood |
| Finish | Touring Grade Textured Black Rubberized Coating |
| Size (WxHxD) | 445 x 800 x 442 mm |
| Weight | 35kg Net, 40kg Gross |
| Manuals / Guides / Diagrams | — | File Size |
|---|---|---|
| Data Sheet | VT153HD_DS | 591 KB |
| Preset | VT153HD_PRESET | 100 KB |
| CAD PDF | VT153HD_CAD_PDF | 60 KB |
| CAD DWG | VT153HD_CAD_DWG | 70 KB |