High Output/Size Ratio, Lightweight Design, Easy & Intergraded Rigging

Real 1200W RMS power capacity (8 hours pink noise)

Premium 18" Neodymium driver with ±11mm linear Xmax. Triple forced cooling
system for low power compression. Heavy braced cabinet for vibration free dy-
namic response. Fully integrated rigging for floor stacking and flying. Touring
grade textured black paint finish.

IWAC118S subwoofer is suitable for bass reinforcement for main PA systems,
touring or permanent installations for small to large stages, indoor or outdoor
live performances.

Suitable in spaces like:
FOH, Live Show, Multi-functional room, Auditorium,
Theatre, Sports Centre, House of Worship

Power Capacity (50~15000Hz pink noise 8 hours) 1200W RMS LF
2400W Program
Nominal impedance 4 Ohm
Frequency response (-6dB half space, no EQ) 28~120Hz
Average Sensitivity 100dB/W/m
Calculated Maximum (SPL / 1m) 131dB continuous
134dB Program
Nominal Directivity (-6dB) 100° H x 15° per cabinet (total vertical directivity depends on the array setup)
Recommended Low Cut Filter High-pass: 30Hz 24dB/oct
Low-pass: 70~120Hz when used with IWAC210
Low Frequency Driver Custom made 18" CELTO Acoustique
Neodymium magnet, 4" In / Out Voice coil
dual demodulating rings
Crossover No, active mode only
Flying hardware Integrated, stack ground and flying
Connectors 2x NEUTRIK Speakon NL4MP (1+/1- Input)
Pole mount Yes , 20mm thread
Cabinet CNC made with tongue and grove assembly
18mm and 15mm premium outdoor grade Finnish WISA birch plywood
Finish Touring grade textured black rubberized coating
Size (WxHxD) 700 x 518 x 745 mm
Weight 52kg net, 57kg gross
Manuals / Guides / Diagrams File Size
Data Sheet IWAC118S_DS 0 KB
V-Audio_IWAC210-057 V-Audio_IWAC210-058 V-Audio_IWAC210-056 V-Audio_IWAC210-048

Have a question? Contact us!

[contact-form-7 id="4" title="Contact 1"]